Bosch · 24-inch category · Research record
Bosch SGE53X55UC cabinet opening requirements
DishwasherFit's record for the Bosch SGE53X55UC gives its cabinet opening requirements and body dimensions from the manufacturer's documents, with the record's status in the lookup. Every figure links to the document it was read from; “Not verified” means no document established it.
Research record. Measurements were read from the linked manufacturer sources. A match in the lookup is a dimensional candidate for an installer to confirm, never a guarantee.
Cabinet opening requirements
| Measurement | Published requirement |
|---|---|
| Minimum opening height | 32 1/8 in |
| Maximum opening height | Not verified |
| Minimum opening width | 24 in |
| Maximum opening width | Not verified |
| Minimum opening depth | 24 in |
| Front clearance | Not verified |
| Corner clearance | Not verified |
Appliance body dimensions
Body dimensions describe the machine, not the hole it needs. They never substitute for the opening requirement above.
| Body measurement | Manufacturer value |
|---|---|
| Height | 32 1/16 in |
| Width | 23 9/16 in |
| Depth | 22 9/16 in |
Published features
- Sound rating
- 46 dBA
- Place settings
- 13
- Racks
- Not verified
- Drying system
- PureDry®
- Annual energy
- 259 kWh/year
- Connectivity
- No
Manufacturer specifications, checked September 20, 2026. Annual energy is a published estimate; sound ratings and drying names are not our test results.
Questions people ask about the SGE53X55UC
Question wording follows the searches Google runs for this model; the answers come only from the manufacturer documents linked on this page and the lookup's three outcomes.
Bosch SGE53X55UC dimensions cutout width
The reviewed manufacturer document lists a minimum cabinet opening of 32 1/8 in high, 24 in wide and 24 in deep for the Bosch SGE53X55UC. Each figure links to its source in the table on this page. Treat any match as a dimensional candidate for an installer to confirm.
Is the SGE53X55UC a standard 24-inch dishwasher?
Bosch places the SGE53X55UC in the 24-inch category. That label describes the cabinet class, not the cutout: the reviewed minimum opening width is 24 in, and the appliance body is 23 9/16 in wide. Use the opening requirement, never the label, when you compare it with your cabinet.
Will the SGE53X55UC fit my opening?
Only your measurements can answer that. Enter the opening's height, width and depth in the lookup; the SGE53X55UC comes back as a dimensional candidate, an installer-review item or outside the published requirements. None of the three outcomes is a fit guarantee: mounting, utilities, floor level, trim, panel weight and door swing stay with the installer.
How tall is the SGE53X55UC, and is that the opening height?
The manufacturer lists the SGE53X55UC appliance body at 32 1/16 in high. The body height is not the opening requirement: the minimum opening height on record is 32 1/8 in. Measure from the finished floor to the counter underside at several points and use the smallest reading.
Manufacturer documents
This is a document-based research record, not a physical installation test or a fit guarantee. Unknowns and source conflicts remain part of the decision.
Check your opening dimensions →
Exact-model retailer links
Resolve the status above before ordering. Confirm stock, delivery, installation service and final cost with the retailer. Links are ordered by retailer name, and commissions never change the dimensional checks.
Installation accessories the manufacturer names
From the Bosch SGE53X55UC specification sheet, checked October 31, 2026. Items marked for one arrangement apply only to it; check what arrives with the dishwasher and what the installer brings before buying anything. Store links are ordered by retailer name. Links marked affiliate may earn us a commission. As an Amazon Associate I earn from qualifying purchases. Commissions never change this list or the fit checks.
- Check the supplied power cord
Included — inspect the delivery The specification drawing shows a three-prong power cord for an outlet connection. Confirm the delivered package before ordering extras.
- SMZPCJB1UC permanent-wiring kit
Permanent wiring only The specification sheet lists this junction-box accessory as optional, for permanent wiring. Have the installer confirm the kit and connection.
- Use the supplied plug-in power cord
Plug-in connection only Confirm the supplied cord reaches the approved outlet. Do not buy a hardwire kit for this choice or reuse an old cord.
- SGZ1010UC drain-hose extension
Only if more drain-hose reach is needed Only if the installer confirms additional reach is needed. The sheet says to always use this approved kit to extend the drain hose and lists it as 76 3/4 inches.
- Confirm drain-hose reach
Needs installer decision No extension is added to this shopping list. Have the installer verify the route.
Build a printable checklist for your wiring and drain choices
All dishwasher records · How the research works · Corrections or a newer manufacturer drawing? Send us the model and source.