What do you need for installation?

Included — inspect the delivery The manual lists mounting brackets and a power cord. Confirm the delivered package before ordering extras.

Manufacturer source

Needs installer decision A plug-in cord is listed as included; permanent wiring calls for SMZPCJB1UC. Establish the connection before buying either accessory.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension.

Manufacturer source

Installer to specify The manual calls for a dishwasher water supply line and suitable shutoff/fittings. Sizes, condition and what is already supplied need an installation-specific check.

Manufacturer source

Needs installer decision If the hole is cut through a metal partition, or local code requires power-cord clips, the manual calls for kit SMZEPCC1UC. Otherwise it is not needed.

Manufacturer source

Included — inspect the delivery The manual lists mounting brackets and a power cord. Confirm the delivered package before ordering extras.

Manufacturer source

Needs installer decision A plug-in cord is listed as included; permanent wiring calls for SMZPCJB1UC. Establish the connection before buying either accessory.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension.

Manufacturer source

Installer to specify The manual calls for a dishwasher water supply line and suitable shutoff/fittings. Sizes, condition and what is already supplied need an installation-specific check.

Manufacturer source

Needs installer decision If the hole is cut through a metal partition, or local code requires power-cord clips, the manual calls for kit SMZEPCC1UC. Otherwise it is not needed.

Manufacturer source

Included — inspect the delivery The manual lists mounting brackets and a power cord. Confirm the delivered package before ordering extras.

Manufacturer source

Needs installer decision A plug-in cord is listed as included; permanent wiring calls for SMZPCJB1UC. Establish the connection before buying either accessory.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension.

Manufacturer source

Installer to specify The manual calls for a dishwasher water supply line and suitable shutoff/fittings. Sizes, condition and what is already supplied need an installation-specific check.

Manufacturer source

Needs installer decision If the hole is cut through a metal partition, or local code requires power-cord clips, the manual calls for kit SMZEPCC1UC. Otherwise it is not needed.

Manufacturer source

Included — inspect the delivery The manual lists mounting brackets and a power cord. Confirm the delivered package before ordering extras.

Manufacturer source

Needs installer decision A plug-in cord is listed as included; permanent wiring calls for SMZPCJB1UC. Establish the connection before buying either accessory.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension.

Manufacturer source

Installer to specify The manual calls for a dishwasher water supply line and suitable shutoff/fittings. Sizes, condition and what is already supplied need an installation-specific check.

Manufacturer source

Needs installer decision If the hole is cut through a metal partition, or local code requires power-cord clips, the manual calls for kit SMZEPCC1UC. Otherwise it is not needed.

Manufacturer source

Included — inspect the delivery The specification drawing shows a three-prong power cord for an outlet connection. Confirm the delivered package before ordering extras.

Manufacturer source

Needs installer decision The drawing shows a plug-in cord; permanent wiring calls for the optional SMZPCJB1UC junction box. Establish the connection before buying either accessory.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension.

Manufacturer source

Included — inspect the delivery GE lists mounting brackets, screws, a hose clamp and a drain-hose extension in the installation package. Check the delivered parts first.

Manufacturer source

Needs installer decision GE lists cable or named power-cord kits depending on installation. Determine the arrangement and reach before buying.

Manufacturer source

Needs installer decision Check the included extension before buying another hose. The guide limits total drain-hose length to 12 feet; ask the installer about routing and any required air gap.

Manufacturer source

Installer to specify GE lists a water connection elbow and other plumbing materials. For a flexible line it names its WX28X326 braided hose, which has no verified Amazon listing. Have the installer confirm what the installation service includes and select the correct connections.

Manufacturer source

Included — inspect the delivery GE lists mounting brackets, screws, a hose clamp and a drain-hose extension in the installation package. Check the delivered parts first.

Manufacturer source

Needs installer decision GE lists cable or named power-cord kits depending on installation. Determine the arrangement and reach before buying.

Manufacturer source

Needs installer decision Check the included extension before buying another hose. The guide limits total drain-hose length to 12 feet; ask the installer about routing and any required air gap.

Manufacturer source

Installer to specify GE lists a water connection elbow and other plumbing materials. For a flexible line it names its WX28X326 braided hose, which has no verified Amazon listing. Have the installer confirm what the installation service includes and select the correct connections.

Manufacturer source

Included — inspect the delivery GE lists a junction box cover and screw, a drain hose of about 58 inches with hose clamp, a drain hose hanger, mounting brackets and screws. Some pieces vary by model; check the delivery first.

Manufacturer source

Needs installer decision GE allows a hardwired cable or the WX09X70910 or WX09X70911 cord kit, and sells jumper harness WD21X26318 to convert a corded unit. Decide the connection before buying.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension. GE limits total drain-hose length to 16 feet from the rear of the dishwasher.

Manufacturer source

Installer to specify GE recommends 3/8-inch copper tubing; for a flexible line it names its WX28X326 braided hose, which has no verified Amazon listing. GE also lists a 90° elbow with 3/4-inch hose thread and a hand shut-off valve.

Manufacturer source

Included — inspect the delivery GE lists a junction box cover and screw, a drain hose of about 58 inches with hose clamp, a drain hose hanger, mounting brackets and screws. Some pieces vary by model; check the delivery first.

Manufacturer source

Needs installer decision GE allows a hardwired cable or the WX09X70910 or WX09X70911 cord kit, and sells jumper harness WD21X26318 to convert a corded unit. Decide the connection before buying.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension. GE limits total drain-hose length to 16 feet from the rear of the dishwasher.

Manufacturer source

Installer to specify GE recommends 3/8-inch copper tubing; for a flexible line it names its WX28X326 braided hose, which has no verified Amazon listing. GE also lists a 90° elbow with 3/4-inch hose thread and a hand shut-off valve.

Manufacturer source

Included — inspect the delivery GE lists a junction box cover and screw, a drain hose of about 58 inches with hose clamp, a drain hose hanger, mounting brackets and screws. Some pieces vary by model; check the delivery first.

Manufacturer source

Needs installer decision GE allows a hardwired cable or the WX09X70910 or WX09X70911 cord kit, and sells jumper harness WD21X26318 to convert a corded unit. Decide the connection before buying.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension. GE limits total drain-hose length to 16 feet from the rear of the dishwasher.

Manufacturer source

Installer to specify GE recommends 3/8-inch copper tubing; for a flexible line it names its WX28X326 braided hose, which has no verified Amazon listing. GE also lists a 90° elbow with 3/4-inch hose thread and a hand shut-off valve.

Manufacturer source

Included — inspect the delivery GE lists a junction box cover and screw, a drain hose of about 58 inches with hose clamp, a drain hose hanger, mounting brackets and screws. Some pieces vary by model; check the delivery first.

Manufacturer source

Needs installer decision Custom-panel models include a kit with a template, hardware and panel instructions. GE says to order WD35X35938 before delivery only if that kit is needed. No verified Amazon listing exists for it.

Manufacturer source

Needs installer decision GE allows a hardwired cable or the WX09X70910 or WX09X70911 cord kit, and sells jumper harness WD21X26318 to convert a corded unit. Decide the connection before buying.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension. GE limits total drain-hose length to 16 feet from the rear of the dishwasher.

Manufacturer source

Installer to specify GE recommends 3/8-inch copper tubing; for a flexible line it names its WX28X326 braided hose, which has no verified Amazon listing. GE also lists a 90° elbow with 3/4-inch hose thread and a hand shut-off valve.

Manufacturer source

Included — inspect the delivery GE lists a junction box cover and screw, a drain hose of about 58 inches with hose clamp, a drain hose hanger, mounting brackets and screws. Some pieces vary by model; check the delivery first.

Manufacturer source

Needs installer decision GE allows a hardwired cable or the WX09X70910 or WX09X70911 cord kit, and sells jumper harness WD21X26318 to convert a corded unit. Decide the connection before buying.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension. GE limits total drain-hose length to 16 feet from the rear of the dishwasher.

Manufacturer source

Installer to specify GE recommends 3/8-inch copper tubing; for a flexible line it names its WX28X326 braided hose, which has no verified Amazon listing. GE also lists a 90° elbow with 3/4-inch hose thread and a hand shut-off valve.

Manufacturer source

Included — inspect the delivery GE lists a junction box cover and screw, a drain hose of about 58 inches with hose clamp, a drain hose hanger, mounting brackets and screws. Some pieces vary by model; check the delivery first.

Manufacturer source

Needs installer decision GE allows a hardwired cable or the WX09X70910 or WX09X70911 cord kit, and sells jumper harness WD21X26318 to convert a corded unit. Decide the connection before buying.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension. GE limits total drain-hose length to 16 feet from the rear of the dishwasher.

Manufacturer source

Installer to specify GE recommends 3/8-inch copper tubing; for a flexible line it names its WX28X326 braided hose, which has no verified Amazon listing. GE also lists a 90° elbow with 3/4-inch hose thread and a hand shut-off valve.

Manufacturer source

Included — inspect the delivery GE lists a junction box cover and screw, a drain hose of about 58 inches with hose clamp, a drain hose hanger, mounting brackets and screws. Some pieces vary by model; check the delivery first.

Manufacturer source

Needs installer decision GE allows a hardwired cable or the WX09X70910 or WX09X70911 cord kit, and sells jumper harness WD21X26318 to convert a corded unit. Decide the connection before buying.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension. GE limits total drain-hose length to 16 feet from the rear of the dishwasher.

Manufacturer source

Installer to specify GE recommends 3/8-inch copper tubing; for a flexible line it names its WX28X326 braided hose, which has no verified Amazon listing. GE also lists a 90° elbow with 3/4-inch hose thread and a hand shut-off valve.

Manufacturer source

Included — inspect the delivery GE lists a junction box cover and screw, a drain hose of about 58 inches with hose clamp, a drain hose hanger, mounting brackets and screws. Some pieces vary by model; check the delivery first.

Manufacturer source

Needs installer decision GE allows a hardwired cable or the WX09X70910 or WX09X70911 cord kit, and sells jumper harness WD21X26318 to convert a corded unit. Decide the connection before buying.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension. GE limits total drain-hose length to 16 feet from the rear of the dishwasher.

Manufacturer source

Installer to specify GE recommends 3/8-inch copper tubing; for a flexible line it names its WX28X326 braided hose, which has no verified Amazon listing. GE also lists a 90° elbow with 3/4-inch hose thread and a hand shut-off valve.

Manufacturer source

Included — inspect the delivery GE lists a junction box cover and screw, a drain hose of about 58 inches with hose clamp, a drain hose hanger, mounting brackets and screws. Some pieces vary by model; check the delivery first.

Manufacturer source

Needs installer decision GE allows a hardwired cable or the WX09X70910 or WX09X70911 cord kit, and sells jumper harness WD21X26318 to convert a corded unit. Decide the connection before buying.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension. GE limits total drain-hose length to 16 feet from the rear of the dishwasher.

Manufacturer source

Installer to specify GE recommends 3/8-inch copper tubing; for a flexible line it names its WX28X326 braided hose, which has no verified Amazon listing. GE also lists a 90° elbow with 3/4-inch hose thread and a hand shut-off valve.

Manufacturer source

Included — inspect the delivery GE lists a drain hose support and joiner with clips and clamp, side mounting brackets, an edge protector, moisture-protection tape, a rubber washer for the inlet hose and a prefinished toekick.

Manufacturer source

Needs installer decision GE recommends the supplied power cord; hardwiring is optional and needs a strain relief clamp.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension.

Manufacturer source

Included — inspect the delivery Monogram lists a junction box cover and screw, jumper harness WD21X26318 for converting to hardwiring, a drain hose of about 94 inches with hose clamp, a high drain loop bracket, mounting brackets and screws.

Manufacturer source

Needs installer decision Custom-panel models need kit ZXADIIY to mount a Monogram handle, or a customer-supplied cabinet pull installed on the panel. No Amazon listing was found for ZXADIIY.

Manufacturer source

Needs installer decision Custom-panel models include a kit with a template, hardware and panel instructions. Monogram says to order WD35X35938 before delivery only if that kit is needed. No Amazon listing was found for it.

Manufacturer source

Needs installer decision Monogram allows a hardwired cable, using the supplied jumper harness, or the WX09X70911 cord kit. Decide the connection before buying.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension. Monogram limits total drain-hose length to 16 feet from the rear of the dishwasher.

Manufacturer source

Installer to specify Monogram recommends 3/8-inch copper tubing; for a flexible line it names GE braided hose WX28X326, which has no verified Amazon listing. A 90° elbow with 3/4-inch hose thread and a hand shut-off valve are also listed.

Manufacturer source

Included — inspect the delivery Monogram lists a junction box cover and screw, jumper harness WD21X26318 for converting to hardwiring, a drain hose of about 94 inches with hose clamp, a high drain loop bracket, mounting brackets and screws.

Manufacturer source

Required purchase Stainless models need one handle kit: ZXADH1STYSS (Statement), ZXADH1MNYSS (Minimalist), ZXADTH1PVB1 (brass) or ZXADTH1PVT1 (titanium). No Amazon listing was found for any of them.

Manufacturer source

Needs installer decision Monogram allows a hardwired cable, using the supplied jumper harness, or the WX09X70911 cord kit. Decide the connection before buying.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension. Monogram limits total drain-hose length to 16 feet from the rear of the dishwasher.

Manufacturer source

Installer to specify Monogram recommends 3/8-inch copper tubing; for a flexible line it names GE braided hose WX28X326, which has no verified Amazon listing. A 90° elbow with 3/4-inch hose thread and a hand shut-off valve are also listed.

Manufacturer source

Included — inspect the delivery Monogram lists a junction box cover and screw, jumper harness WD21X26318 for converting to hardwiring, a drain hose of about 94 inches with hose clamp, a high drain loop bracket, mounting brackets and screws.

Manufacturer source

Needs installer decision Custom-panel models need kit ZXADIIY to mount a Monogram handle, or a customer-supplied cabinet pull installed on the panel. No Amazon listing was found for ZXADIIY.

Manufacturer source

Needs installer decision Custom-panel models include a kit with a template, hardware and panel instructions. Monogram says to order WD35X35938 before delivery only if that kit is needed. No Amazon listing was found for it.

Manufacturer source

Needs installer decision Monogram allows a hardwired cable, using the supplied jumper harness, or the WX09X70911 cord kit. Decide the connection before buying.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension. Monogram limits total drain-hose length to 16 feet from the rear of the dishwasher.

Manufacturer source

Installer to specify Monogram recommends 3/8-inch copper tubing; for a flexible line it names GE braided hose WX28X326, which has no verified Amazon listing. A 90° elbow with 3/4-inch hose thread and a hand shut-off valve are also listed.

Manufacturer source

Included — inspect the delivery Fisher & Paykel lists side and top brackets, sealing tape, screws, a pre-finished toe kick panel, spacer sets and a foot-adjusting tool.

Manufacturer source

Installer to specify The dishwasher comes with a power cord. Hardwiring is optional, needs a qualified electrician and replaces the supplied cord.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension.

Manufacturer source

Installer to specify The guide shows connections through a dual or single air gap kit. Whether one is needed depends on local plumbing code.

Manufacturer source

Included — inspect the delivery Fisher & Paykel lists side brackets, sealing tape, screws, chassis-feet fixing screws and spacer sets.

Manufacturer source

Installer to specify The dishwasher comes with a power cord. Hardwiring is optional, needs a qualified electrician and replaces the supplied cord.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension.

Manufacturer source

Installer to specify The guide shows a connection through a single air gap kit. Whether one is needed depends on local plumbing code.

Manufacturer source

Installer to specify Fisher & Paykel requires isolation taps so the water supply can be shut off. Connect the supplied inlet hose to it.

Manufacturer source

Included — inspect the delivery Fisher & Paykel lists side and top brackets, sealing tape, screws, a pre-finished toe kick panel, a mounting bracket and cutting template for a custom toe kick, spacer sets and shims.

Manufacturer source

Installer to specify This integrated model takes custom drawer panels made to the minimum sizes on page 5. Have the cabinetmaker supply them.

Manufacturer source

Installer to specify The dishwasher comes with a power cord. Hardwiring is optional, needs a qualified electrician and replaces the supplied cord.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension.

Manufacturer source

Installer to specify The guide shows connections through a dual or single air gap kit. Whether one is needed depends on local plumbing code.

Manufacturer source

Installer to specify Samsung lists electrical and duct tape, a hot water line, a 3/4-inch 90° fitting, tube fittings, a hose clamp, an air gap, a rubber connector and thread-seal tape or compound as not provided. It warns against plastic tubing for the water line.

Manufacturer source

Installer to specify Samsung strongly recommends 3/8-inch minimum O.D. copper tubing with a compression fitting, or a braided stainless hot water supply line, plus a 90° fitting with 3/4-inch NPT thread.

Manufacturer source

Installer to specify Samsung recommends a jacketed, grounded 12-2 cable; some local codes require a BX metal jacket.

Manufacturer source

Needs installer decision If the drain hose does not fit the sink connector, Samsung says to buy an adaptor at a plumbing or hardware store.

Manufacturer source

Included — inspect the delivery Frigidaire lists two installation brackets with screws, a condensation strip, adjustment caps, a cable tie for the drain hose and an adjustable toeplate.

Manufacturer source

Installer to specify Frigidaire lists twist-on wire connectors, a strain relief, electrical and duct tape, a hot water supply line, a 90° elbow, tube fittings, an air gap, a rubber connector, a hose clamp, PTFE thread-seal tape and a power cable if the unit cannot be hard wired.

Manufacturer source

Included — inspect the delivery ASKO says to use only the inlet hose supplied with the dishwasher, not an old or spare one.

Manufacturer source

Installer to specify The supply pipe needs an easily accessible water supply valve.

Manufacturer source

Needs installer decision Measure the planned route with the installer before deciding on an extension.

Manufacturer source

Installer to specify The dishwasher has a power cord with a grounding plug. The outlet goes in a cabinet or wall next to the dishwasher space; if the partition is metal, the access hole needs an edge protector. No part number is given.

Manufacturer source

Needs installer decision If a side of the dishwasher will be visible, ASKO requires side panels from its freestanding accessory kit, bought where you bought the dishwasher. A fully built-in installation does not need it.

Manufacturer source

Installer to specify Summit says the dishwasher may be converted from cord-connected to permanent wiring only by an authorized service representative with an appropriate conversion kit, arranged through the dealer.

Manufacturer source

Installer to specify Summit lists a hot water supply line (copper tubing or a metal braided dishwasher line), a shut-off valve and fittings, and a UL-listed conduit connector or strain relief.

Manufacturer source

Installer to specify The water inlet valve has a 3/4-11.5NH coupling thread. Summit says to choose an inlet hose with a matching thread.

Manufacturer source

Installer to specify Summit says the dishwasher may be converted from cord-connected to permanent wiring only by an authorized service representative with an appropriate conversion kit, arranged through the dealer.

Manufacturer source

Installer to specify Summit lists a hot water supply line (copper tubing or a metal braided dishwasher line), a shut-off valve and fittings, and a UL-listed conduit connector or strain relief.

Manufacturer source

Installer to specify The water inlet valve has a 3/4-11.5NH coupling thread. Summit says to choose an inlet hose with a matching thread.

Manufacturer source

Installer to specify Summit says the dishwasher may be converted from cord-connected to permanent wiring only by an authorized service representative with an appropriate conversion kit, arranged through the dealer.

Manufacturer source

Installer to specify Summit lists a hot water supply line (copper tubing or a metal braided dishwasher line), a shut-off valve and fittings, and a UL-listed conduit connector or strain relief.

Manufacturer source

Installer to specify The water inlet valve has a 3/4-11.5NH coupling thread. Summit says to choose an inlet hose with a matching thread.

Manufacturer source

Installer to specify Summit says the dishwasher may be converted from cord-connected to permanent wiring only by an authorized service representative with an appropriate conversion kit.

Manufacturer source

Installer to specify Summit lists a 3/8-inch minimum O.D. copper or metal braided supply line, an elbow with 3/4-inch NPT female thread, thread sealant, a UL-listed conduit connector or strain relief, a shut-off valve and fittings, and a discharge hose adaptor.

Manufacturer source

Installer to specify Summit says the shut-off valve, supply hose, elbow and fittings are not supplied and must be bought separately from a plumbing supplier.

Manufacturer source

Installer to specify Summit says the dishwasher may be converted from cord-connected to permanent wiring only by an authorized service representative with an appropriate conversion kit.

Manufacturer source

Installer to specify Summit lists a 3/8-inch minimum O.D. copper or metal braided supply line, an elbow with 3/4-inch NPT female thread, thread sealant, a UL-listed conduit connector or strain relief, a shut-off valve and fittings, and a discharge hose adaptor.

Manufacturer source

Installer to specify Summit says the shut-off valve, supply hose, elbow and fittings are not supplied and must be bought separately from a plumbing supplier.

Manufacturer source

Installer to specify Summit says the dishwasher may be converted from cord-connected to permanent wiring only by an authorized service representative with an appropriate conversion kit.

Manufacturer source

Installer to specify Summit calls for copper tubing or a metal braided dishwasher supply line. The inlet thread is 3/4-11.5NH; buy a hose to match.

Manufacturer source

Needs installer decision If the drain hose does not fit the sink connector, Summit says to use an adaptor.

Manufacturer source

Installer to specify Summit says the dishwasher may be converted from cord-connected to permanent wiring only by an authorized service representative with an appropriate conversion kit.

Manufacturer source

Installer to specify Summit calls for copper tubing or a metal braided dishwasher supply line. The inlet thread is 3/4-11.5NH; buy a hose to match.

Manufacturer source

Needs installer decision If the drain hose does not fit the sink connector, Summit says to use an adaptor.

Manufacturer source

Installer to specify Summit says the dishwasher may be converted from cord-connected to permanent wiring only by an authorized service representative with an appropriate conversion kit.

Manufacturer source

Installer to specify Summit calls for copper tubing or a metal braided dishwasher supply line. The inlet thread is 3/4-11.5NH; buy a hose to match.

Manufacturer source

Needs installer decision If the drain hose does not fit the sink connector, Summit says to use an adaptor.

Manufacturer source

Installer to specify Summit says the dishwasher may be converted from cord-connected to permanent wiring only by an authorized service representative with an appropriate conversion kit.

Manufacturer source

Installer to specify Summit lists a 3/8-inch minimum O.D. copper or metal braided supply line, an elbow with 3/4-inch NPT female thread, a shut-off valve and fittings, and a discharge hose adaptor.

Manufacturer source

Installer to specify Summit says the shut-off valve, supply hose, elbow and fittings are not supplied and must be bought separately from a plumbing supplier.

Manufacturer source