Fisher & Paykel · 24-inch category · Held for installer review
Fisher & Paykel DD24SAX9N cabinet opening requirements
DishwasherFit's record for the Fisher & Paykel DD24SAX9N gives its cabinet opening requirements and body dimensions from the manufacturer's documents, with the record's status in the lookup. Every figure links to the document it was read from; “Not verified” means no document established it.
Held for installer review. Candidate requires installer review of site conditions, utilities, panel or drawer clearance; do not enable automatic fit from this research batch. The lookup never returns this record as an automatic candidate while the gate stands.
Cabinet opening requirements
| Measurement | Published requirement |
|---|---|
| Minimum opening height | 16 1/4 in |
| Maximum opening height | Not verified |
| Minimum opening width | 23 5/8 in |
| Maximum opening width | Not verified |
| Minimum opening depth | 22 13/16 in |
| Front clearance | Not verified |
| Corner clearance | Not verified |
Appliance body dimensions
Body dimensions describe the machine, not the hole it needs. They never substitute for the opening requirement above.
| Body measurement | Manufacturer value |
|---|---|
| Height | 16 1/8 in |
| Width | 23 9/16 in |
| Depth | 22 9/16 in |
Published features
- Sound rating
- 43 dBA
- Place settings
- 7
- Racks
- Not verified
- Drying system
- Fan assisted drying
- Annual energy
- 151 kWh/year
- Connectivity
- Smart Appliance
Manufacturer specifications, checked September 20, 2026. Annual energy is a published estimate; sound ratings and drying names are not our test results.
Questions people ask about the DD24SAX9N
Question wording follows the searches Google runs for this model; the answers come only from the manufacturer documents linked on this page and the lookup's three outcomes.
Fisher Paykel DD24SAX9N dimensions cutout width cabinet
The reviewed manufacturer document lists a minimum cabinet opening of 16 1/4 in high, 23 5/8 in wide and 22 13/16 in deep for the Fisher & Paykel DD24SAX9N. Each figure links to its source in the table on this page. This record is held for installer review, so the lookup never returns it as an automatic candidate.
Is the DD24SAX9N a standard 24-inch dishwasher?
Fisher & Paykel places the DD24SAX9N in the 24-inch category. That label describes the cabinet class, not the cutout: the reviewed minimum opening width is 23 5/8 in, and the appliance body is 23 9/16 in wide. Use the opening requirement, never the label, when you compare it with your cabinet.
Will the DD24SAX9N fit my opening?
Only your measurements can answer that. Enter the opening's height, width and depth in the lookup; the DD24SAX9N comes back as a dimensional candidate, an installer-review item or outside the published requirements, and because this record is held for installer review it never appears as an automatic candidate. None of the three outcomes is a fit guarantee: mounting, utilities, floor level, trim, panel weight and door swing stay with the installer.
How tall is the DD24SAX9N, and is that the opening height?
The manufacturer lists the DD24SAX9N appliance body at 16 1/8 in high. The body height is not the opening requirement: the minimum opening height on record is 16 1/4 in. Measure from the finished floor to the counter underside at several points and use the smallest reading.
Why is the DD24SAX9N held for installer review?
It carries a blocking review gate: Candidate requires installer review of site conditions, utilities, panel or drawer clearance; do not enable automatic fit from this research batch. The gate stays visible on this page until the evidence resolves.
Manufacturer documents
This is a document-based research record, not a physical installation test or a fit guarantee. Unknowns and source conflicts remain part of the decision.
Check your opening dimensions →
Exact-model retailer links
Resolve the status above before ordering. Confirm stock, delivery, installation service and final cost with the retailer. Links are ordered by retailer name, and commissions never change the dimensional checks.
Installation accessories the manufacturer names
From the Fisher & Paykel installation guide 431377C, checked October 31, 2026. Items marked for one arrangement apply only to it; check what arrives with the dishwasher and what the installer brings before buying anything. Store links are ordered by retailer name.
- Check the supplied installation parts
Included — inspect the delivery Fisher & Paykel lists side brackets, sealing tape, screws, chassis-feet fixing screws and spacer sets.
- Supplied power cord; hardwiring optional
Installer to specify The dishwasher comes with a power cord. Hardwiring is optional, needs a qualified electrician and replaces the supplied cord.
- Drain hose extension kit (no part number given)
Only if more drain-hose reach is needed If the supplied hose does not reach, Fisher & Paykel sells a 63-inch extension kit at fisherpaykel.com. The guide gives no part number, so no product link is shown.
- Confirm drain-hose reach
Needs installer decision No extension is added to this shopping list. Have the installer verify the route.
- Air gap kit, if your code requires one
Installer to specify The guide shows a connection through a single air gap kit. Whether one is needed depends on local plumbing code.
- Isolation tap on the water supply
Installer to specify Fisher & Paykel requires isolation taps so the water supply can be shut off. Connect the supplied inlet hose to it.
Build a printable checklist for your wiring and drain choices
Compared in: ADA dishwashers compared
All dishwasher records · How the research works · Corrections or a newer manufacturer drawing? Send us the model and source.