GE Profile · 24-inch category · Research record
GE Profile PDP755SYVFS cabinet opening requirements
DishwasherFit's record for the GE Profile PDP755SYVFS gives its cabinet opening requirements and body dimensions from the manufacturer's documents, with the record's status in the lookup. Every figure links to the document it was read from; “Not verified” means no document established it.
Research record. Measurements were read from the linked manufacturer sources. A match in the lookup is a dimensional candidate for an installer to confirm, never a guarantee.
Cabinet opening requirements
| Measurement | Published requirement |
|---|---|
| Minimum opening height | 33 1/2 in |
| Maximum opening height | Not verified |
| Minimum opening width | 24 in |
| Maximum opening width | Not verified |
| Minimum opening depth | 24 in |
| Front clearance | Not verified |
| Corner clearance | Not verified |
Appliance body dimensions
Body dimensions describe the machine, not the hole it needs. They never substitute for the opening requirement above.
Published features
- Sound rating
- 42 dBA
- Place settings
- 16
- Racks
- 3
- Drying system
- Twin Turbo Dry Boost™
- Annual energy
- 240 kWh/year
- Connectivity
- Built-In
Manufacturer specifications, checked September 20, 2026. Annual energy is a published estimate; sound ratings and drying names are not our test results.
Questions people ask about the PDP755SYVFS
Question wording follows the searches Google runs for this model; the answers come only from the manufacturer documents linked on this page and the lookup's three outcomes.
GE Profile PDP755SYVFS dimensions cutout size specifications
The reviewed manufacturer document lists a minimum cabinet opening of 33 1/2 in high, 24 in wide and 24 in deep for the GE Profile PDP755SYVFS. Each figure links to its source in the table on this page. Treat any match as a dimensional candidate for an installer to confirm.
Is the PDP755SYVFS a standard 24-inch dishwasher?
GE Profile places the PDP755SYVFS in the 24-inch category. That label describes the cabinet class, not the cutout: the reviewed minimum opening width is 24 in, and the appliance body is 23 3/4 in wide. Use the opening requirement, never the label, when you compare it with your cabinet.
Will the PDP755SYVFS fit my opening?
Only your measurements can answer that. Enter the opening's height, width and depth in the lookup; the PDP755SYVFS comes back as a dimensional candidate, an installer-review item or outside the published requirements. None of the three outcomes is a fit guarantee: mounting, utilities, floor level, trim, panel weight and door swing stay with the installer.
How tall is the PDP755SYVFS, and is that the opening height?
The manufacturer lists the PDP755SYVFS appliance body at 34 in high. The body height is not the opening requirement: the minimum opening height on record is 33 1/2 in. Measure from the finished floor to the counter underside at several points and use the smallest reading.
Manufacturer documents
This is a document-based research record, not a physical installation test or a fit guarantee. Unknowns and source conflicts remain part of the decision.
Check your opening dimensions →
Exact-model retailer links
Resolve the status above before ordering. Confirm stock, delivery, installation service and final cost with the retailer. Links are ordered by retailer name, and commissions never change the dimensional checks.
Installation accessories the manufacturer names
From the GE installation instructions 31-4000322 Rev 1, checked October 31, 2026. Items marked for one arrangement apply only to it; check what arrives with the dishwasher and what the installer brings before buying anything. Store links are ordered by retailer name. Links marked affiliate may earn us a commission. As an Amazon Associate I earn from qualifying purchases. Commissions never change this list or the fit checks.
- Check the installation package
Included — inspect the delivery GE lists a junction box cover and screw, a drain hose of about 58 inches with hose clamp, a drain hose hanger, mounting brackets and screws. Some pieces vary by model; check the delivery first.
- WX09X70910 cord kit — 5.4 feet
Plug-in connection only For a plug-in connection GE allows only WX09X70910 (5.4 ft) or WX09X70911 (7.9 ft). Confirm the reach to the outlet, and do not buy a cord if the delivered unit already has one installed. The 7.9-foot kit is not linked: its Amazon listing gives a different length.
- WD21X26318 jumper harness — only to convert a corded unit
Permanent wiring only GE says to buy this harness only when a power cord with plug is already installed and you want a hardwired connection. The electrician also supplies the cable, strain relief and UL-listed wire nuts.
- WD24X10065 12-foot drain hose
Only if more drain-hose reach is needed Only if the supplied hose does not reach. GE names this 12-foot service hose, which connects to the drain loop on the unit; total drain-hose length must not exceed 16 feet. GE also lists a 4-foot hose, WD24X10062, which is not linked here.
- Confirm drain-hose reach
Needs installer decision No extension is added to this shopping list. Have the installer verify the route.
- Hot water line, shut-off valve and 90° elbow
Installer to specify GE recommends 3/8-inch copper tubing; for a flexible line it names its WX28X326 braided hose, which has no verified Amazon listing. GE also lists a 90° elbow with 3/4-inch hose thread and a hand shut-off valve.
Build a printable checklist for your wiring and drain choices
All dishwasher records · How the research works · Corrections or a newer manufacturer drawing? Send us the model and source.