GE Profile · 18-inch category · Sources reviewed 2026-09-14
GE Profile PDT145SGLWW cabinet opening requirements
DishwasherFit's record for the GE Profile PDT145SGLWW gives its cabinet opening requirements and body dimensions from the manufacturer's documents, with the record's status in the lookup. Every figure links to the document it was read from; “Not verified” means no document established it.
Sources reviewed 2026-09-14. A manual review compared the linked documents. A match in the lookup is a dimensional candidate for an installer to confirm, never a guarantee.
Cabinet opening requirements
| Measurement | Published requirement |
|---|---|
| Minimum opening height | 32 1/2 in |
| Maximum opening height | 34 3/4 in |
| Minimum opening width | 18 in |
| Maximum opening width | Not verified |
| Minimum opening depth | 24 in |
| Front clearance | 23 1/8 in |
| Corner clearance | 2 in |
Appliance body dimensions
Body dimensions describe the machine, not the hole it needs. They never substitute for the opening requirement above.
Installation notes from the review
- Keep plumbing and electrical services inside the shaded area in the installation drawing; the remaining rear wall must be clear.
- Compare the finished floor inside the opening with the room floor before planning removal or replacement.
Published features
- Sound rating
- 47 dBA
- Place settings
- 8
- Racks
- Not verified
- Drying system
- Condensate Dry
- Annual energy
- 240 kWh/year
- Connectivity
- Optional (Requires part no. PBX23W00Y1)
Manufacturer specifications, checked September 20, 2026. Annual energy is a published estimate; sound ratings and drying names are not our test results.
Questions people ask about the PDT145SGLWW
Question wording follows the searches Google runs for this model; the answers come only from the manufacturer documents linked on this page and the lookup's three outcomes.
GE Profile PDT145SGLWW dimensions cut out width
The reviewed manufacturer document lists a minimum cabinet opening of 32 1/2 in high, 18 in wide and 24 in deep for the GE Profile PDT145SGLWW, with a maximum opening height of 34 3/4 in. Each figure links to its source in the table on this page. Its sources were reviewed on 2026-09-14.
Is the PDT145SGLWW a standard 18-inch dishwasher?
GE Profile places the PDT145SGLWW in the 18-inch category. That label describes the cabinet class, not the cutout: the reviewed minimum opening width is 18 in, and the appliance body is 17 3/4 in wide. Use the opening requirement, never the label, when you compare it with your cabinet.
Will the PDT145SGLWW fit my opening?
Only your measurements can answer that. Enter the opening's height, width and depth in the lookup; the PDT145SGLWW comes back as a dimensional candidate, an installer-review item or outside the published requirements. None of the three outcomes is a fit guarantee: mounting, utilities, floor level, trim, panel weight and door swing stay with the installer.
How tall is the PDT145SGLWW, and is that the opening height?
The manufacturer lists the PDT145SGLWW appliance body at 32 1/2 in high. The body height is not the opening requirement: the minimum opening height on record is 32 1/2 in and the maximum is 34 3/4 in. Measure from the finished floor to the counter underside at several points and use the smallest reading.
Why is the PDT145SGLWW held for installer review?
It carries installation notes from the review. Keep plumbing and electrical services inside the shaded area in the installation drawing; the remaining rear wall must be clear. Compare the finished floor inside the opening with the room floor before planning removal or replacement. The gate stays visible on this page until the evidence resolves.
Manufacturer documents
This is a document-based research record, not a physical installation test or a fit guarantee. Unknowns and source conflicts remain part of the decision.
Check your opening dimensions →
Exact-model retailer links
Resolve the status above before ordering. Confirm stock, delivery, installation service and final cost with the retailer. Links are ordered by retailer name, and commissions never change the dimensional checks.
Installation accessories the manufacturer names
From the GE installation instructions, checked September 14, 2026. Items marked for one arrangement apply only to it; check what arrives with the dishwasher and what the installer brings before buying anything. Store links are ordered by retailer name. Links marked affiliate may earn us a commission. As an Amazon Associate I earn from qualifying purchases. Commissions never change this list or the fit checks.
- Check mounting hardware and drain extension
Included — inspect the delivery GE lists mounting brackets, screws, a hose clamp and a drain-hose extension in the installation package. Check the delivered parts first.
- WX09X70910 cord kit — 5 feet 4 inches
Plug-in connection only A named plug-in cord option. Confirm the required reach; the manual also names a different 7-foot-9-inch kit, WX09X70911, which is not linked here.
- Permanent-wiring materials
Permanent wiring only Ask the installer to specify electrical cable, strain relief and connectors for the approved arrangement. A plug-in cord is not added to this list.
- Drain route and supplied extension
Needs installer decision Check the included extension before buying another hose. The guide limits total drain-hose length to 12 feet; ask the installer about routing and any required air gap.
- Supply line, elbow and fittings
Installer to specify GE lists a water connection elbow and other plumbing materials. For a flexible line it names its WX28X326 braided hose, which has no verified Amazon listing. Have the installer confirm what the installation service includes and select the correct connections.
Build a printable checklist for your wiring and drain choices
Compared in: Every 18-inch dishwasher’s opening size · Dishwashers for openings under 32 inches · ADA dishwashers compared
All dishwasher records · How the research works · Corrections or a newer manufacturer drawing? Send us the model and source.